Friday, November 30, 2012

[Equipment] JDN Hoists on Offshore Rig

JDN Hoists on Offshore Rig

Four J D Neuhaus type EH50 air operated monorail hoists have been supplied and mounted by Westcon Løfteteknikk AS of Bergen to the Maersk offshore rig Guardian.

These products have been specified for the synchronised lifting and handling of an 18.3/4” 15,000psi BOP unit before and after drilling operations. Two hoists are each mounted on twin parallel overhead rails, with each hoist providing 50 tonne load and 20 metre lift capacities for between deck operations. Removable connector bars have also been supplied for fitting between paired hoists on the individual rails to maintain a fixed working distance of 4060mm between the load hook centres.

With the two sets of hoists operating together, a combined lift capacity of 200 tonnes is made available. The minimum horizontal travel distance of the trolleys with the connector bars fitted is 14.81 metres. The maximum available free travel without the connector bars in place is 18 metres, with the travel distance limited by pneumatic end switches mounted on the hoist trolleys.

Synchronised operation of all linear movement and lifting operations of individual, paired or all the four hoists when used in conjunction, is provided with the F type multi-function pendant controllers also supplied by JDN. These tough, ergonomically designed controllers are suitable for the outdoor, heavy-duty operations that can be experienced offshore. A main air emergency stop together with load monitoring device is incorporated in the controllers. The two overhead beams are 23 metres in length and also carry twin energy chain power supplies, with each power chain comprising two x 1” diameter air supply hoses.

A complete offshore documentation package was supplied together with all hoists having JDN’s full protection kit for offshore corrosion protection which includes:
- Exposed components including valves, valve heads and all bolts and nuts smaller than 12mm are manufactured from stainless steel
- Trolley wheel bearings and threaded bolt ends and nuts fitted with grease packed covers
- Hoists fitted with special-design galvanised chain containers with stainless steel suspension chains
- Hoists finished with a JDN four layer marine paint, top coat in traffic yellow RAL1023, providing a total dry thickness of minimum 280 microns



Published : November 29, 2012



Komec B2B Marketplacewww.shipsol.com
Chinese Blog : blog.sina.com.cn/komec
General Support: +82-51-972-6474, +82-51-972-6478
E-mail: gsc@komea.kr

KOMEC QR CODE / KOMEC Blog QR CODE

No comments:

Post a Comment